CrazyBikeLife
User Manual
Trail Adventure Miniature — Scale 1:6
Smoke & Sound Edition⚙️ Step by step
1
Place the bike
Place your bike on a flat, stable surface before any handling.
2
Deploy the kickstand
Deploy the centre kickstand to stabilise the bike.
3
Fill the tank
- Fill the supplied pipette with clean water.
- Open the tank hatch and pour in the water.
- Close the hatch.
4
Install the battery
- Unclip the seat cushion.
- Unscrew the cover and insert the charged battery.
- Screw the cover back on.
- Clip the cushion back on.
5
Turn on the lights
Press the power button at the centre of the handlebar to turn on the LED headlights.
6
Start the bike
Press the button on the right of the handlebar to start the bike and hear the engine roar.
7
Spin the rear wheel — Smoke effect 💨
Turn the grip to spin the rear wheel and trigger the exhaust smoke effects.
💧 Good to know
- Use only the supplied pipette to fill the tank.
- Excess liquid may cause a leak or malfunction.
⚠️ Warning
- Never place the bike in a damp location — always handle with care.
- Keep the product out of reach of children.
- Do not disassemble, pierce or modify the product — use only the supplied accessories.
- Avoid overcharging and short-circuiting the battery — never throw it into fire.
- Never leave the battery charging unattended.
